Deprecated: Required parameter $query follows optional parameter $post in /var/www/html/wp-content/plugins/elementor-extras/modules/breadcrumbs/widgets/breadcrumbs.php on line 1215
Arduino - Uno, Nano & Mega - Blocks, Python Functions, Projects | PictoBlox Extension
[PictoBloxExtension]
PictoBlox Extension

Arduino – Uno, Nano & Mega

Arduino_UNO
Extension Description
Control the inbuilt functionalities of Arduino such as the digital and analog Input/Output, tone, and timer.
  • STEMpedia-Rocket-800x800 Available in: Block Coding
  • STEMpedia-Rocket-800x800 Mode: Stage Mode, Upload Mode
  • STEMpedia-Rocket-800x800 WiFi Required: No
  • STEMpedia-Rocket-800x800 Compatible Hardware in Block Coding: Arduino Uno, Arduino Mega, Arduino Nano
  • STEMpedia-Rocket-800x800 Compatible Hardware in Python: Not Applicable
  • STEMpedia-Rocket-800x800 Object Declaration in Python: Not Applicable
  • STEMpedia-Rocket-800x800 Extension Catergory:

Introduction

The Arduino extension allows you to control the inbuilt functionalities of the Arduino board (Arduino Uno, Arduino Mega, and Arduino Nano) such as the digital and analog Input/Output, tone, and timer.

Read More

PictoBlox Blocks

The block turns OFF the specified RGB LED of Quarky.
The function stops the specified motor of the Quarky.
The block initializes the ultrasonic sensor with specified echo and trig pins.
The block checks whether the selected class has been detected or not. If the class is detected, then the block returns true; else, false.
Scripts that wear this block will activate once the selected class is predicted either on the recognition window, stage or camera.
Scripts that wear this block will activate once the selected class is predicted either on the recognition window, stage or camera.
The block reports the mass of the sprite.
The block sets the threshold for the sensor connected to the selected pin. Threshold helps users decide whether the sensor is active or not. If the sensor value is greater than the threshold value, the sensor is active, or else it is inactive.
The block reports if the Wi-Fi is connected to the Quarky or ESP32 or not. This block is only available in Upload Mode.
The block sets the oscillator parameters for the selected servo motor.
The block resets the timer to 0.
The block sets the servo motors of the humanoid legs and hands to the specified angles at the specified speed.
The block sets the selected servo motor angle to the specified angle in the specified time. This creates a smooth motion for the servo motor from the current angle to the specified angle.
The block sets the pick or the place action angles to the specified value.
The block makes a request to ChatGPT to get all the nouns, pronouns, verbs, adverbs, adjectives, propositions, conjunction, and interjection from the text specified in it. The response of ChatGPT is then stored in PictoBlox and can be accessed using the get AI response block.
This block takes in a given value and converts it to either an integer or a float depending on the input.
The block writes the text and numbers on the 4×7 segment display.
This block is used to control an end-effector of the robotic arm to move in an arc.
This block sets motor speeds for Quarky’s line following, defining forward and turning speeds for tracking a black line on a white path.
Jumps the sprite up, a specified number of grid squares and then down again.
Changes the costume of the sprite as specified from the options.
Runs the blocks inside if a specified button is pressed of the quarky.
Runs the left motor of the wizbot in a specified direction.
Lights up the LED of the wizbot with specified color.
The block is used to draw an outline of the circle or a filled circle of a specified radius and center position on evive TFT display. It takes the center and the radius of the circle from the user and draws an outline of a circle.
The block sets the digital state of the specified digital pin to either “High” or “Low”. If the output is High, the pin will be at 5V and if the output is Low the pin will be at 0V.
is tactile switch pressed
Dabble inputs module have two tactile switches. This block reports the state of the tactile switch (pressed or not) in real-time. If the switch is pressed, then it returns true else false.
move arm block
This block is to assign custom hand actions to our Humanoid Robot.
The block moves its sprite steadily to the specified X and Y position in the specified amount of seconds – this is like pointing the sprite in a direction and repeatedly using Move () Steps, but with more precision. A disadvantage of the glide block, however, is that it pauses the script while the sprite is moving, preventing the script from doing other things while the sprite is gliding.
The block changes its sprite’s size by the specified amount. The default sprite size is 100; size values below that percentage are for shrunken sprites, and size values above it are for overlarge sprites.
All articles loaded
No more articles to load

Block Coding Examples

There are no block coding examples for the extension to show.
Table of Contents

Company

Community

Products

School Programs

Impact Programs

Learning Resources

Product Documentation

Get in Touch

Follow Us

Facebook Twitter Youtube Instagram Linkedin

PictoBlox - Block & Python Coding for Kids

Dabble App - One App. Infinite Control.

Copyright 2025 – Agilo Research Pvt. Ltd. All rights reserved – Terms & Condition | Privacy Policy