Actuators – evive & Arduino

Extension Description

Control the actuators such as DC motors and servos connected to evive and Arduino boards.

Available in: Block Coding
Mode: Stage Mode, Upload Mode
WiFi Required: No
Compatible Hardware in Block Coding: evive, Arduino Uno, Arduino Mega, Arduino Nano, ESP32
Compatible Hardware in Python: Not Applicable
Object Declaration in Python: Not Applicable
Extension Catergory: Arduino, evive

Introduction

Actuators extension enables you to control the actuators such as DC motors and servos connected to evive and Arduino boards.

PictoBlox Blocks

The block changes its sprite’s costume to the next one in the costumes pane, but if the current costume is the last in the list, the block will loop to the first.

It clears any sound effects currently in place. However, it does not stop the sound currently being played.

The block pauses its script until the specified Boolean condition is true.

The block sends a broadcast throughout the whole Scratch program. Any scripts in any sprites that are hatted with the When I Receive () block that is set to a specified broadcast will activate. This broadcast block lets scripts send broadcasts without any waits in its script (unlike the Broadcast () and Wait block). Broadcasts are a good way to have sprites and scripts communicate.

The () of object () block reports the following attributes of the object: class, x position, y position, width, height, and confidence.

The block checks if the Boolean inside it is false — if it is false, the block returns true; if the condition is true, it returns false.

The block simply reports the items of its list as a string. Whenever a list is created, a version of the block appears with the list’s name on it; this results in a version of this block for every list.

This block returns the y position of the pose landmark detected. The position is mapped with the stage coordinates.

The recognized () () name block reports the name of the recognized celebrity/brand/object/image tag.

The get expression of face () block reports the recognized expression of the selected face. If the face selected is not detected, then it reports NULL.

Once you have analyzed the images for handwritten text, you can use a handwritten text result block to get the recognized text from the image in a string format.

The block reports the recognized class from the selected image feed (camera, stage, costume, or backdrop).

The () of object () block reports the following attributes of the object: class, x position, y position, width, height, and confidence.

The block returns the x or y coordinate of the specified landmark points of the QR code.

The block returns the wind speed (Unit Default: meter/sec) or the wind direction (in degrees – meteorological) of the location.

The block sets the project’s tempo, or speed, to the specified amount, using the unit “bpm”, or “beats per minute”.

The block changes the specified value by the number input.

The block changes the specified value to the integer or float according to the input.

The block is used to create custom patterns on the RGB LED display of Quarky.

The block performs the automatic line following logic with the parameters specified in the set parameter F () T1 () T2 () block.

The block sets the orientation of the robot to align the left and right movement of the robot in horizontal robot position and vertical robot position.

The block is a hat block and starts the execution of the script added under it when the specified touch sensor of Quarky is pressed.

The block reports the recognized class from the analyse image from () block.

Once you have analyzed the images, you can use the get # of objects block to get the number of objects recognized in the image.

The block reports the recognized class from the analyse image from () block.

The block sets the sprite’s mass to the specified value.

The block reports the state of the analog sensor connected to the selected pin. The block returns true when the analog reading of the sensor is greater than the threshold value set by the user. Else it reports false.